Securing your system
67
Table 25
no snmp-server name command parameters and variables
Parameters and
variables
Description
<text>
Specifies the SNMP sysName value; enter an
alphanumeric string of up to 255 characters.
default snmp-server name command
The
default snmp-server name
command restores sysName to the
default value. The syntax for the
default snmp-server name
command
is:
default snmp-server name
The
default snmp-server name
command is executed in the Global
Configuration command mode.
Table 26 "default snmp-server name command parameters and variables"
(page 67)
describes the parameters and variables for the
default
snmp-server name
command.
Table 26
default snmp-server name command parameters and variables
Parameters and
variables
Description
<text>
Specifies the SNMP sysName value; enter an
alphanumeric string of up to 255 characters.
snmp trap link-status command
The
snmp trap link-status
command enables the linkUp/linkDown
traps for the port. The syntax of the command is:
snmp trap link-status [port <portlist>]
The
snmp trap link-status
command is executed in the Interface
Configuration command mode.
Table 27 "snmp trap link-status command parameters and variables"
(page 68)
describes the parameters and variables for the
snmp trap
link-status
command.
Nortel Ethernet Routing Switch 2500 Series
Security — Configuration and Management
NN47215-505 (323165-B)
02.01
Standard
4.1
19 November 2007
Copyright © 2007, Nortel Networks
.
Summary of Contents for 2526T
Page 227: ......
