72
Configuring Security using the CLI
Parameters and
variables
Description
notify-view
<view-name>
Specifies the notify view to which the new user has
access:
•
view-name
— specifies the view name; enter an
alphanumeric string of up to 255 characters.
des/aes/3des
<password>
Specifies the use of a des/aes/3des privacy
passphrase.
•
password — specifies the new user’s
des/aes/3des privacy passphrase; enter an
alphanumeric string of minimum 8 characters.
If this parameter is omitted, the user is created
with only authenticated access rights.
ATTENTION
This parameter is not available when Password
Security is enabled, in which case the switch
prompts you to enter and confirm the new
password.
no snmp-server user command
The
no snmp-server user
command deletes the specified user. The
syntax for the
no snmp-server user
command is:
no snmp-server user [engine-id <engineid>] <username>
The
no snmp-server user
command is executed in the Global
Configuration command mode.
Table 31 "no snmp-server user command parameters and variables" (page
73)
describes the parameters and variables for the
no snmp-server
user
command.
Nortel Ethernet Routing Switch 2500 Series
Security — Configuration and Management
NN47215-505 (323165-B)
02.01
Standard
4.1
19 November 2007
Copyright © 2007, Nortel Networks
.
Summary of Contents for 2526T
Page 227: ......
