Nordson Asymtek Spectrum S-920, Installation, Operation & Maintenance Manual

Page: 163 / 238

Maintenance 7-3
Table 7-1 Routine Maintenance Procedures (Continued)
Task Frequency Instructions
Lubricate Mechanical
Drive Cables Every three
months
See 7.8.1 Lubricating the Cables .
Clean Camera Lens
Every three
months
Use the cleaning kit provided.
Tension Mechanical
Drive Cables Every 6-12
months
See 7.9 Tensioning the Cables .
Tension Conveyor Belts As Needed See 7.10 Tensioning the Conveyor Belts .
Replace Conveyor Belts As Needed See 9.7 Replacing the Conveyor Belts .
7.5 Replacing Consumables
Consumables are items that are discarded and replaced on a regular basis. The following items are
common consumables and should be replaced at the intervals recommended in Table 7-1.
•
Purge Boots
•
Scale and Purge Cups
Tools and Materials Needed
•
Needle-nosed Pliers
•
Replacement Purge Boot (see Table 7-2)
•
Isopropyl Alcohol
•
Replacement 1 oz. (29 ml) Plastic Cups (P/N 58-0030)
•
Clean Shop Cloth
•
Small Brush
•
Rubber Gloves
•
Personal Protective Equipment (as required)
Table 7-2 Purge Boot Colors, Sizes, and Compatible Needles
Purge Boot Color Inside Diameter Compatible Needle Gages Asymtek P/N
Orange 0.5 mm (0.020-in.) 26, 27, 30, 32 01-0019-00
Pink 0.8 mm (0.031-in.) 22, 23, 24, 25 01-0021-00
Green 1.1 mm (0.045-in.) 19, 20, 21 01-0018-00
Olive* 3.0 mm (0.120-in.) 14, 15, 16, 18 01-0022-00
*Recommended size for nozzles on DJ-2000 and DJ-9000 Series Dispensing Valves.