Nordson Asymtek Spectrum S-920, Installation, Operation & Maintenance Manual

Page: 191 / 238

Parts Replacement 9-1
9 Parts Replacement
9.1 Overview
This section includes general information for ordering recommended spares and replacement parts for
your Spectrum S-920 Dispensing System. Replacement part numbers are listed in
Appendix C . Part
number information is also available on Asymtek’s Find-A-Part web page:
http://webstore.asymtek.com/awweblive/apps/findapart_index.asp
This section contains the following procedures:
•
Parts Ordering Information
•
Cleaning and Inspection
•
Unpacking and Inspecting Replacement Parts
•
Gaining Access to Dispensing System Components
•
Replacing the Conveyor Belts
•
Replacing the Camera Lens
•
Replacing the Height Sensor Probe
•
Replacing Fuses
"
NOTE This section does not include the removal and replacement of dispensing valve
components. Refer to the manual for your specific dispensing valve for instructions.
WARNING! CAUTION!
Operation of your S-920 Dispensing System involves heat, air pressure, electrical
power, mechanical devices, and the use of hazardous materials. It is essential
that every person servicing or operating the dispensing system fully understands
all hazards, risks, and safety precautions. Refer to
Section 2 - Safety for
additional information.
9.2 Record Keeping
The type of service performed should be recorded in the dispensing system maintenance records. Dates,
part numbers/serial numbers of replaced parts, names of technicians, and other pertinent data should be
recorded.
WARNING!
Some part replacement procedures involve the use and disposal of hazardous
materials. Always follow the material manufacturer MSDS, facility requirements,
and local regulations for protection of personnel and disposal of materials.