PROPlus / PRO Series Automated Dispensing Systems
114
www.nordsonefd.com [email protected]
+1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
Appendix A, Command Function Reference
(continued)
Dispense End Setup
Click
Function
After dispensing a dot or line, it is often required to raise the tip a short distance at a slow speed. This allows the
fluid to cleanly break free from the tip to prevent it from being incorrectly applied. The parameters for Dispense
End Setup affect how far and how fast the tip raises after dispensing.
Parameter
Description
Retract Low Speed
The speed (in mm/s) at which the tip raises after dispensing.
Range: 0–150 mm/s
Retract High Speed
After the tip raises the amount specified by Retract Distance at the speed specified by
Retract Low Speed, the tip continues raising to the Z-clearance height at the speed
(in mm/s) specified by this setting. The purpose of specifying a Z-clearance height is to
allow the tip to raise high enough to clear any obstacles it encounters on the way to the
next point.
Range: 0–150 mm/s
Retract Distance
The distance (in mm) the tip raises after dispensing.
Z Clearance
Retract
High Speed to
Z Clearance
height
Retract
Distance at
Retract Low
Speed
Example illustration of Dispense End Setup
