PROPlus / PRO Series Automated Dispensing Systems
110
www.nordsonefd.com [email protected]
+1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
Appendix A, Command Function Reference
(continued)
Block Initialize
Click
Function
Double-click
address and
select from drop-
down menu
When two Step & Repeat Block commands are present in a program, use Block Initialize to specify that
the system should use the same points that are selected in the Run Block Select window. Refer to “How to
Disable Dispensing for Specific Workpieces in an Array” on page 69 for details.
Call Pattern
Click
Function
Double-click
address and
select from
drop-down
menu
Causes the system to dispense in a pattern that is like another pattern in the program, but at the location in
the program where the Call Pattern command occurs. The called pattern must have a Label assigned to it. The
system stops dispensing the called pattern when it reaches an End Pattern command.
Example of a program that includes a Call Pattern command
