PROPlus / PRO Series Automated Dispensing Systems
34
www.nordsonefd.com [email protected]
+1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.
Horizontal and Vertical Toolbar Icons
Use the icons located on the horizontal and vertical toolbars to manage files, insert certain commands, and perform
other functions as described below.
Icon Name
Icon
Function
A New File
Creates a new file
Open a File
Opens a file
Save
Saves the open file
Save As
Saves the open file as a new
file name
Undo
Undoes the last command
Redo
Restores the last Undo action
Cut
Cuts a selection
Copy
Copies a selection
Paste
Pastes a selection
Insert
Inserts a memory address
Delete
Deletes the current memory
address
CCD Mode
Toggles the system between
camera mode and tip mode
Tip Mode
Toggles the system between
camera mode and Tip Mode
Match
Centers the camera on a mark
selected in the Mark Library
(camera must be near the mark
on the workpiece)
Example
Provides sample programs
that contain examples of the
commands you can use to
create programs
Path
Switches the Secondary view
screen from the Camera view
to the Grid view (Path mode)
Icon Name
Icon
Function
Light
Allows temporary override of
the Light settings
Refresh
(Path mode only)
Refreshes
the Secondary View screen
See All
(Path mode only)
Shows all
the programed points on the
Secondary View screen
Magnify
(Path mode only)
Magnifies
an area of the Secondary View
screen
Path
Direction
(Path mode only)
Provides an
arrow to show the direction in
which the robot arm will move
Move
Moves the tip or camera to
the XYZ location of a selected
address (if the address has a
location value)
Enable
Address
Re-enables an address that
was previously disabled using
Disable Address
Disable
Address
Disables a command in
the program (re-enable the
command by clicking Enable
Address while in the selected
address)
Focus
Automatically moves the Z
position to the focus position
based on the initial setup
Step &
Repeat
Block
For a Step & Repeat command,
disables dispensing onto
workpieces at selected
locations in an array
Transform
Aligns the program points of
an uploaded DXF drawing
with their actual locations on a
workpiece
Extend Step
& Repeat
Expands all the commands in a
Step & Repeat command (can
only be undone using the Undo
icon)
Change Z
Value
Changes the Z value in a
command or in a list of
selected commands in a
program (mainly used to fine-
tune and adjust the dispensing
gap)
Point Offset
Changes or moves all program
points if the placement of a
workpiece was changed
Joystick
If connected, toggles an
optional control method (such
as a joystick) on or off
Pico Touch
Opens the Pico Touch Remote
Control window
