A
CCESS
G
ATEWAY
42
Installing the Access Gateway
A WAN port summary page will then be displayed as shown in Figure 5.
Port Name : WAN
Port Role : wanIf
Configuration Mode : dhcp
IP Address : Your IP address
Subnet Mask : Your subnet mask
Gateway IP : Your gateway IP addrss
WAN 802.1Q tagging : Disabled
VLAN ID : 1
DNS Domain Name : Your domain name
DNS Server 1 : Your primary DNS IP address
DNS Server 2 :
DNS Server 3 : 0.0.0.0
Additional NAT IP addresses : Disabled
show all - Show all WAN Interface configuration
show interface <name> - Show a single WAN Interface configuration
modify interface <name> - Modify a single WAN Interface configuration
Type b to go back, <esc> to abort, ? for help.
Ethernet port/WAN interface configuration>
Figure 5:
WAN port DHCP client configuration summary page.
If everything is correct in the summary, type (
b
)ack to return to the previous menu, and proceed to step 2 to
enter location information.
Otherwise, select an option from the Ethernet port configuration menu to display or make changes to the
WAN port settings. When finished with settings, type
b
(ack) to return to the previous menu, and go to step 2.
Step 1c: PPPoE Dynamic IP Client Configuration
Enter (
p
)ppoe when prompted. Enter the following
mandatory
settings for a PPPoE connection with dynamic
PPP IP configuration shown in Figure 6.
Configuring minimal WAN interface connectivity parameters:
Port Role [wanIf ] : (outOfService, subscriberIf, wanIf)
Configuration Mode [static ] (static, dhcp, pppoe) : p
PPPoE Service Name [ ] : ("none" to clear) : Your Service
LCP Echo-Request Interval [30 ] :
Maximum LCP Non-responses [6 ] :
PPP Authentication User Name [ ] : ("none" to clear) : Your User Name
PPP Authentication Password [ ] : ("none" to clear) : Your Password
Summary of Contents for AG 2300
Page 1: ......