A
CCESS
G
ATEWAY
System Administration
161
2.
Choose the
Subscriber
account type.
3.
Define the DHCP Address Type:
Public
or
Private
(only used when the IP Upsell feature is enabled,
otherwise leave this set to “private”).
4.
Enter a valid
MAC Address
for the subscriber.
If you have chosen to manage this subscriber by user name only, you do not need to enter a MAC address
(but you must enter a user name).
5.
Enter the
IP Address
of the subscriber.
6.
Enter a valid
Subnet
address for this subscriber.
7.
Enter the
IPv6
address for this subscriber.
8.
In the
Username
field, enter a user name for this subscriber. If you entered a MAC address and you do
not want to assign a user name, skip Step 9 (password).
User names and passwords are case-sensitive. Having a user name and password is an
optional service that subscribers may request (for example, if they are using more than
one machine, or moving between locations and they want an additional level of security).
If they request this service, they are prompted at the login screen for the user name and
password you assign here. Solution providers can charge a fee for this service, at their
discretion.
9.
If you assigned a user name, you must now assign a
Password
.
10.
In the
Expiration Time
field, define the duration (in hours and minutes) for the subscriber’s authorized
access time. When the assigned time expires, the subscriber must “re-subscribe” to the service.
11.
Enter an amount in the
Paid
field.
12.
The next two fields (
User Definable 1
and
User Definable 2
) are optional. Use these fields for simple
notations about the subscriber.
13.
Define the
Max Upstream Bandwidth
and
Max Downstream Bandwidth
range for this subscriber (in
Kbps).
14.
If using Class-Based Queuing, enter the primary and subclass for this subscriber in the
Class
field. Enter
these values in the format:
<top-level class>
.
<subclass>
(top-level class and subclass
separated by a period)
.
See
on page 9 and
on page 84.
15.
Select a policy from the
QoS Policy
Setting up Quality of Service {QoS}
for more
information.
16.
Enable
Countdown after login
if you want the timeout amount to take effect after the user logins. If the
option is not enabled, user timeouts take effect the moment the subscriber is added.
17.
Enable
STMP Redirection
to allow the specified user to have their SMTP traffic redirected by the global
SMTP redirect configuration.
18.
Click on the
Add
button to add this subscriber to the database, or click on the
Restore
button if you want
to reset all the values to their previous state.
Adding a Device Type Profile
1.
From the Web Management Interface, click on
Subscriber Administration
, and then
Add
.
The
Add a
Subscriber Profile to the Database
screen appears:
Summary of Contents for AG 2300
Page 1: ......