Nomadix AG 2300, User Manual, Page: 100 / 294

A
CCESS
G
ATEWAY
88 System Administration
1.
From the Web Management Interface, click on Configuration , then Destination HTTP Redirection .
The Destination HTTP Redirection Settings screen appears:
2. To enable Destination HTTP Redirection, click on the Enabled check box. The default setting is
disabled.
You may create up to 20 portal pages.
3.
In the
Portal Pages
section, enter the matching string that will be directed to the portal page in the
Matching String field.
4.
Enter the portal page’s URL in the
URL
field.
5.
To enable parameter passing, click on the Parameter Passing
Enable
check box.
6.
Select the Parameter Signing:
•
Method : None , HASH-CRC32 , or HMAC-MD5 (select one method).
•
Parameters : UI , MA , RN , and PORT (select all applicable parameters).
7. To enable Set Shared Secret, click on the Set Shared Secret check box. If you enable this feature, enter
the shared secret text string in the Set Shared Secret field.
8.
Click on the
Save
button to save the redirection settings, or click on the
Restore
button if you want to
reset all the values to their previous state.
9. Portal page setting are saved to the table in Existing Portal Page entries section of the screen.
From that table, you can edit or delete existing portal pages.
Managing the DHCP service options {DHCP}
When a device connects to the network, the DHCP server assigns it a “dynamic” IP address for the duration of
the session. Most users have DHCP capability on their computer. To enable this service on the Access Gateway,
you can either enable the DHCP relay (routed to an external DHCP server IP address), or you can enable the
Access Gateway to act as its own DHCP server. In both cases, DHCP functionality is necessary if you want to
automatically assign IP addresses to subscribers.