A
CCESS
G
ATEWAY
System Administration
95
1.
Enable IPv6 on the involved ports.
2.
Set up prefix delegation on the WAN port.
3.
Determine the delegated prefix and interface address for the subscriber port you will use. (Network
Info / Interfaces)
4.
Based on that information, configure the device’s IPv6 settings.
Delegated prefixes are assigned in sequence starting at 0 for Eth0. TEI1 is port 8, the delegation is
:80 /60, so if TEI1 is Sub it will get :87. Our subscriber could therefore be configured like this:
Summary of Contents for AG 2300
Page 1: ......