A
CCESS
G
ATEWAY
System Administration
205
2.
Enter the
Internal IP Address
.
Ensure that the device with the Internal IP Address has been added to the subscriber’s
table.
3.
Enter the
Internal Port
reference.
4.
Enter a valid
MAC Address
.
5.
Enter the
External IP Address
.
The External IP address field will default to the IP address of the Access Gateway.
6.
Enter the
External Port
reference.
7.
Optional
: Enter the
Remote IP Address
. Leave this field set to zero if you want to connect to the internal
device from any network-side workstation.
8.
Optional:
Enable the
Protect with Source IP-based Access Control
option. Enabling this will only
allow address in the source-based access control list to connect on this port mapping. Source-based
access control needs to be enabled for this to be in effect.
9.
Optional
: Enter the
Remote Port
reference. Leave this field set to zero if you want to connect to
the device from any TCP/UDP port of a network-side workstation.
10.
Select the protocol (
TCP
or
UDP
) from the pull-down menu.
Summary of Contents for AG 2300
Page 1: ......