A
CCESS
G
ATEWAY
120
System Administration
•
RFC1493 Compliant Systems
•
RiverDelta 1000B
•
Elastic Networks
These options enable an SNMP query to “ask” the access concentration device which card, slot, or port the
information is coming from. The information can then be “sent to” and “billed by” the PMS. You must enter
the
IP address
(not name),
SNMP community
, and
SNMP query
duration (maximum time it takes to detect
subscriber migration) of all access concentrators connected to the site. You can also opt to Relogin after
migration by checking the “Relogin after migration”
Enable
box.
For “cascading” Tut and RFC1493 compliant systems, click on the associated
Cascading
button. The
Cascading Support
screen appears, allowing you to enter the IP address and SNMP community for the
primary and all “cascading” devices connected to the site. For RFC1493 compliant systems, you have the
additional option of defining the “Uplink port.”
From the
Cascading Support
screen, you can return to the main
Port-Location Settings
screen at any time by
pressing the
Back
button.
7.
Click
Save
to save your changes, or click
Restore
if you want to reset all the values to their previous
state.
In Room Port Mapping
This section shows In Room Port Mapping from the subscriber side, when the
In Room Port Mapping
feature
is enabled.
Access Gateway multiple VLAN tagged systems can use the same tags and be
placed on different Subscriber ports. Although it is technically possible to place
two different VLAN tagged switches (one on each Subscriber side) that have the
same VLAN tags designated, this configuration can cause problems. To avoid
Summary of Contents for AG 2300
Page 1: ......