A
CCESS
G
ATEWAY
System Administration
109
multiple properties, the properties are identified in the log files by their IP addresses.
1.
From the Web Management Interface, click on
Configuration
, then
Logging
. The
Log Settings
screen appears:
2.
If required, click on the check box for
System Log
to enable system logging.
When system logging is enabled, the standard SYSLOG protocol (UDP) is used to send all message
logs generated by the Access Gateway to the specified SYSLOG server.
3.
Enter a unique number (between 0 and 7) in the
System Log Number
field. This ID
number is assigned to the
System Log Server
.
4.
Enter a valid IP address in the
System Log Server IP
field.
5.
If required, repeat Steps 2 through 4 for the
AAA Log
feature.
6. Setting a Log Filter
: The syslogs can be filtered at 7 levels as shown above. Setting the level to
Summary of Contents for AG 2300
Page 1: ......