Nokia IP560 - Hard Disk Drive Based Installation Manual Download

Page: 91 / 160

Upgrading the Boot Manager

IP560 Security Platform Installation Guide

To upgrade the boot manager
1.

Obtain the upgraded boot-manager image from the appropriate
Nokia Customer Support site as listed in

“Nokia Contact Information”

page 3.

At the Nokia IPSO command prompt, enter:

/etc/upgrade_bootmgr wd0 /etc/nkipflash

The command upgrades the boot manager with the new image
(nkipflash), writing it into the internal compact flash (wd0). The upgrade
takes some time to complete. Do not interrupt the upgrade process.

Summary of Contents for IP560 - Hard Disk Drive Based

































































































































































Search results

Summary of Contents for IP560 - Hard Disk Drive Based

Reviews:

Related manuals for IP560 - Hard Disk Drive Based

Brands by name

Popular brands

Nokia IP560 - Hard Disk Drive Based, Installation Manual

Search results

Summary of Contents for IP560 - Hard Disk Drive Based

Reviews:

Related manuals for IP560 - Hard Disk Drive Based

Brands by name

Popular brands