Nokia IP560 - Hard Disk Drive Based, Installation Manual

Page: 117 / 160

Installing a Hard-Disk Drive
IP560 Security Platform Installation Guide 117
Before You Begin
Caution
Hard-disk drives are susceptible to damage from shock. Handle
them with care.
Caution
To help guard against electrostatic discharge damage, make sure
you are properly grounded by using a grounding wrist strap and
following the instructions provided with the wrist strap before you
handle the components or open the appliance or gateway. If you do
not have a grounding wrist strap, make sure you are properly
grounded before you touch any electronic component.
To install or replace a hard-disk drive, you need:
„
Physical access to the appliance or gateway
„
Nokia hard-disk drive kit and accompanying supplement
„
A Phillips-head screwdriver
The following procedure requires removing the chassis tray assembly from
the chassis.
Caution
Make sure you perform an orderly shut down of the system before
attempting to remove the chassis tray assembly.
You must replace the hard-disk drive with a drive that has a capacity equal to
or larger than the drive you are replacing. Back up your hard-disk drive files
to a remote system on a regular basis.