Nokia IP560 - Hard Disk Drive Based, Installation Manual

Page: 68 / 160

5
Connecting PMC Network Interface Cards
68 IP560 Security Platform Installation Guide
Caution
To protect the IP560 and the memory modules from electrostatic
discharge damage, make sure you are properly grounded before you
touch these components. Use a grounding wrist strap and follow the
instructions provided with the wrist strap before you handle the
components or open the appliance.
Four-Port 10/100 Ethernet NIC
The IP560 supports Nokia-approved, four-port UTP5 dual-mode (10-Mbps
and 100-Mbps) Ethernet NICs installed in a PMC expansion slot. When you
purchase a 10/100 Ethernet NIC with your IP560, the NIC is installed before
the appliance is delivered to you. For information about how to add or replace
a NIC, see
Chapter 4, “Installing and Replacing Network Interface Cards.”
10/100 Ethernet NIC Features
The four-port 10/100 Ethernet NIC supports PCI operation at 133 MHz and
runs on Nokia IPSO v4.0.1 or higher.
In the IP560, the four-port Ethernet NIC supports the following features:
Four-port copper Gigabit Ethernet
(10/100/1000)
Two-port copper Gigabit Ethernet
(10/100/1000) 133 MHz
133 MHz
Two-port fiber-optic Gigabit Ethernet 133 MHz
Table 7 NIC PCI Frequency
NIC or interface port
Maximum PCI operation
supported