Nokia IP560 - Hard Disk Drive Based, Installation Manual

Page: 143 / 160

Replacing the Battery
IP560 Security Platform Installation Guide 143
(CLI). For information about the CLI, see the CLI Reference Guide. For more
information about Network Voyager, see the Nokia Network Voyager
Reference Guide or use the Network Voyager inline help.
To monitor the IP560 appliance power supply by using Nokia
Network Voyager
1.
Log on to the IP560 appliance with Network Voyager.
2. Click Monitor.
3. Click Hardware Monitoring > System Status.
To the right of the Power Supply link, the status indicator is green for
normal and red for fault.
4. For more detailed information about the power supply status, click Power
Supply.
Replacing the Battery
To replace the battery, you need the following:
„
The appropriate Nokia battery replacement kit for your appliance
„
Physical access to the appliance
„
A Phillips-head screwdriver
„
A grounding wrist strap
„
(Optional) Safety glasses
Warning
An explosion might occur if the battery is incorrectly placed. Replace the
battery only with the same or equivalent type that the manufacturer
recommends. Dispose of used batteries according to the manufacturer’s
instructions.