Nokia 500i, Installation Manual

Page: 58 / 80

3
Installing and Replacing Optional Cards
58 Nokia 500i Installation Guide
11.
Insert the new NIC or a blank bezel by doing one of the following:
a.
Insert the NIC front bezel into the PMC carrier and gently push the
back of the NIC down toward the chassis assembly.
Make sure that the NIC edge is completely seated into the connectors
on the chassis assembly.
b.
Insert a blank bezel onto the front of the empty slot formerly occupied
by the NIC and push it gently into place.
Make sure that the bezel is completely seated onto the slot on the front
of the PMC carrier and that the screw holes on the bottom of the bezel
align with those on the bottom of the PMC carrier. Proceed to
step 13 .
Note
The blank bezel is required for the Nokia 500i gateways to meet
emissions requirements during operation.
00314