Nogueira FTN-1000 Super G2, Instruction Manual

Page: 150 / 220

40
Instructions Manual
4. Preparation
4.1- Hydraulic system
Connecting the hoses to the tractor:
Make sure that the quick coupling is clean
before connecting it to the tractor valve. Dirt
might contaminate the system, prevent the
correct connection and preventing the oil
flow.
1.
Remove the protective caps (R) from valves
and hoses.
2.
Couple the hoses onto the valves from the
tractor’s remote control, pushing firmly.
Connecting the hoses to the tractor's
hydraulic system:
Disconnecting the hoses from the tractor
With the control levers in the neutral position,
pull the hoses quickly: the disconnection will
occur with minimum oil loss.
Before connecting and disconnecting the
hoses, it is necessary to relieve the pressure
in the hydraulic system. To do this, turn off
the tractor and activate the levers some
times, relieving the system.
With the control levers in the neutral
position, pull the hoses quickly: the
disconnection will occur with minimum
oil loss.
ATTENTION!
Avoid working with different tractors on the
same machine. This practice can lead to the
mixing of different types of oil, which can
damage the tractor's hydraulic system.
R