Nogueira FTN-1000 Super G2, Instruction Manual

Page: 142 / 220

32
Instructions Manual
4. Preparation
4.1- Mounting the machine
In order to gain space and facilitate transportation, some components are
supplied disassembled from the machine. Follow the instructions below to
mount these items.
4.1.1- Mounting the aligners
1.
Fit the aligners (A) and (B) on the head.
Note that the aligners are different (one is
tilted and the other is straight).
Make the mounting according to the
pictures on the side.
2.
Fasten the aligners with the bolts (E),
without tightening the nuts for now.
3.
Fit the bender (C) to the aligners.
4.
Insert and tighten the 2 nuts (F), fixing the
2 aligners (A) and (B).
A
B
TILTED
STRAIGHT
E
= Hex Bolt M8 x 45 mm (02 pcs)
F = Lock Nut M8 (02 pcs)
F
E