Nogueira FTN-1000 Super G2, Instruction Manual

Page: 180 / 220

70
Instructions Manual
5. Operation
5.
Remove bolt (E) from protective cover;
6.
Lift the protective cover (F);
7.
Fit the inverter tool (G) to the gearbox
shaft end
8.
Using your hands, turn the inverter tool in
the direction shown in the illustration. The
feeding rollers will rotate in the opposite
direction to the working direction,
expelling (throwing out) accumulated
material into the platform. Rotate until all
material is removed.
9.
After the “unclogging”, remove the
inverter tool (G) and store it;
10.
Lower the protective cover (F);
11.
Fit the bolt, the two flat washers and the
nut (E).
F
E
G