72
Instructions Manual
6. Maintenance
6.1- General recommendations
Never operate the machine for extended periods indoors and without
ventilation, the carbon monoxide expelled by the exhaust fumes from the
tractor is highly toxic.
Keep the maintenance area clean. Wet or oily floors are slippery and dangerous.
Always park the machine in a flat location.
Use tools in good condition when performing any service on the machine.
When replacing bolts and nuts, use the same specification as the original.
Always use the proper torque as specified in the torque chart in this manual.
Before starting a hydraulic repair, relieve pressure on the system.
Tighten all nuts and bolts periodically.
When completing a maintenance procedure, make sure all safety guards are
installed before operating the machine.
The use of personal protective equipment (PPE) is mandatory during
maintenance services on the machine.
After the first 50 continuous working hours, it is essential to retighten all the
fastening bolts on the machine.
CAUTION!
Never stand under hydraulic lifting
equipment without proper restraints.
Failure of the hydraulic system and
equipment will fall, resulting in a serious
accident.
Use appropriate supports for raised
weight.
Summary of Contents for FTN-1000 Super G2
