Nogueira FTN-1000 Super G2, Instruction Manual

Page: 179 / 220

Instructions Manual
69
5. Operation
ENGLISH
5.1- Clearing (unclogging)
'UNCLOGGING' PROCEDURE:
1.
Immediately stop the tractor and
disconnect the power take-off;
2.
Remove the key from the ignition;
3.
Check that the safety pin of the machine
has broken. If it is broken, replace it with
a new one. To change the safety pin, see
item 6.8 “SAFETY PINS”.
4.
Take the inverter tool (G) and the handle
(H) from the tool box on the machine arm;
INVERTER TOOL
G
H
In case of 'clogging' the harvester, unclog the
feeding rollers using the inverter tool supplied
with the machine (figure on the side).
Keep the inverter tool always with the
machine, so it will be available whenever
necessary.
ATTENTION!
DANGER!
In the event of a 'clogging', immediately
turn off the tractor and remove the key
from the ignition.
NEVER TRY TO UNBLOCK THE MACHINE
WITH THE TRACTOR ON! RISK OF SERIOUS
ACCIDENT!