Instructions Manual
45
4. Preparation
ENGLISH
ATTENTION!
Turn off the tractor and remove
the ignition key before starting
the following procedure.
How to change the chopped size:
1.
Remove the 4 bolts (A) and the cover (B);
2.
Loosen the tensioner bolt (C);
3.
Loosen and remove the chain (D);
4.
Remove the bolt (G) and the sprocket
wheel (H);
5.
Remove the 2 bolts (J) and the cover (K);
4.1- Theoretical length of cut
TO HARVEST OTHER CROPS
Different cutting sizes can be obtained,
changed according to the gears used and the
number of chopper rotor knives. Possible sizes
range from 2.5 to a maximum of 18 mm.
The table below shows the possible cuts, their
gear pairs and the number of knives required
to obtain each size.
G
J
J
D
A
B
C
H
K
CHOPPING CHANGE
Summary of Contents for FTN-1000 Super G2
