98
MECHA User’s Guide
v.05.4
© 2020 FANOTEC
Automa�c pairing using the UI
Power up horizontal MECHA and press
[1]
when LEDs shows spli�ng lights
(
- = - = - = - =
).
1. Connect to horizontal MECHA with MECHA SSID and password. Refer to
if needed. SSID and password are printed
on the supplied QR code label. Record them if the label is not available.
2.
Open
3. Select
Default Mode
:
[AP+STA]
4. Select
[Apply]
5. Power up ver�cal MECHA and press
[1]
when LEDs shows spli�ng lights
(
- = - = - = - =
).
6. Connect to ver�cal MECHA with MECHA SSID and password.
7. Open
8. Select
Default Mode
:
[STA]
9. Select
[Apply]
10. Select
[Connect to Wi-Fi]
, enter SSID and password for horizontal
MECHA.
11. Connect to horizontal MECHA again using MECHA SSID.
12. Access
If pairing is successful, UI will show
[H]
at the upper le� corner and
[Team .x]
near the bo�om of page, where
x
is the last part of the IP in
192.168.8.x.
The ver�cal MECHA can be accessed by selec�ng the
[H]
icon or by typing
192.168.8.x
on browser address. Ver�cal MECHA UI
will show
[V]
at the upper le� corner and
[Team]
near the bo�om of
page. Select
[V]
to go back to horizontal MECHA. Use 2 Tabs with MECHA
IPs in browser to access both MECHAs quickly.
User:
admin
Password:
Mecha
User:
admin
Password:
Mecha
Summary of Contents for Fanotec MECHA
Page 1: ...USER S GUIDE October 10 2020...
Page 14: ...14 MECHA User s Guide v 05 4 Single Axis 2020 FANOTEC Part 1 MECHA Single Axis...
Page 48: ...48 MECHA User s Guide v 05 4 Dual Axis 2020 FANOTEC Part 2 MECHA Dual Axis Combo DAC...
Page 50: ...50 MECHA User s Guide v 05 4 Dual Axis 2020 FANOTEC...