Nodal Ninja Fanotec MECHA, User Manual, Page: 24 / 109

24
MECHA User’s Guide v.05.4
‒
Single Axis
© 2020 FANOTEC
Presets for MECHA Single Axis
Downloading the presets from server
You can make your own presets or download presets from server. To
download presets from server, on
Row page, select the op�on More from
server from the Presets list, and follow the instruc�ons for downloading.
If More from server op�on is not in the Presets list, then tap the [Connect
to Wi-Fi] bu�on, enter the required SSID name and password for a Wi-Fi
with Internet access then, a�er two beeps, re-load the User Interface. If no
beeps are heard a�er the MECHA’s LEDs scan up and down, then please try
to connect again and pay a�en�on to the name and password, as they are
case sensi�ve.
If the Wi-Fi network you connect MECHA to is your regular network you
want to use for MECHA, any �me you start MECHA and press
[3] at the
spli�ng lights, MECHA will be accessible both via phone and local network,
provided that for the local network the Internet is available. As a benefit,
MECHA will also check for any firmware update, if available, and will show
a pop-up on UI to read the news and update, if you want.
Downloaded presets are added to the end of the list, and note their names
start with (s) and they are not saved yet.
The presets for MECHA Single Axis available for download, at the moment,
are:
• 4_Shots_Around.mps
• 6_Shots_Around.mps
• 8_Shots_Around.mps
• 10_Shots_Around.mps
• 12_Shots_Around.mps
Let's analyze the 6_Shots_Around.mps , no�ng that the descrip�on is close
enough for all the others.
This preset is suitable for a single row panorama, 6 shots around, and can
be used in
the S1 (Simple 1) display level. Just select the preset from the list
and it will load automa�cally without tapping the [Load] bu�on.
To launch the preset, tap either the [RIGHT] or [LEFT] bu�ons.