Nodal Ninja Fanotec MECHA, User Manual, Page: 37 / 109

• [Reboot] bu�on - restarts MECHA,
similar to restar�ng a computer.
• Volume of Beeps - is a value from 0 to
250, and can be entered via Custom , or
select another op�on from the list.
• Power Saving Mode - a list of op�ons to
set MECHA to shut down automa�cally
a�er a certain number of minutes of
inac�vity, or vice versa, to keep it always
on. The se�ng for this field can be done
on the
Configura�on page, in which case
it has priority over other op�ons, and is
displayed on a gray background.
• [Go to Ring] bu�on - accesses the Ring
page, and alternates with [Go to Row] .
• [Team] bu�on - ini�ates a temporary pairing with a second MECHA,
which can be controlled if it joins the team. To confirm joining, enter the
code
12< on the second MECHA using its bu�ons. The second MECHA
will act as a MECHA-V, and the first as a MECHA-H in Dual Axis Combo.
Both MECHAs can be connected to the local wireless network.
• [Shut Down] bu�on - shuts down MECHA in 20 seconds. Press [Cancel]
or [Stop] to cancel.
• [Connect to Wi-Fi] bu�on - ini�ates the process of connec�ng to a Wi-Fi
network, to use MECHA in sta�on mode, or for firmware update.
• [Wi-Fi Off] bu�on - turns Wi-Fi OFF. It needs power cycling to have it ON
again.
• [More or Less...] bu�on - shows more or less se�ngs.
37
MECHA User’s Guide v.05.4
‒
Single Axis
© 2020 FANOTEC