Nodal Ninja Fanotec MECHA, User Manual, Page: 91 / 109

91
MECHA User’s Guide v.05.4
‒
Dual Axis
© 2020 FANOTEC
91
MECHA User’s Guide v.05.4
‒
Dual Axis
© 2020 FANOTEC
In the loop, we have only the �l�ng of 3° for MECHA-V, and no changes for
H interval.
The above loop repeats with -3 ° instead of 3° for MECHA-V:
=10(^-3_30, =^-3),
EXAMPLE 8
Script for 28mm on a full frame camera: two images 90° apart for both
zenith and nadir. 2 rows of 10 shots at 45° above & below horizontal, and 12
shots around for the horizontal. 36 shots in total. Start in
parked posi�on
(zenith), and end in raised posi�on (nadir).
S=90, 1=0_0, =_30, 11=-45, =_36, 9=45, 10=90,
=_90, =-90_0, =_-90, =
S=90, - start posi�on is parked .
1=0_0 , - first shot is at 0,0 (no rota�on).
=_30, - the next shot is at the same �lt, but 36° apart, and will keep going so
11=-45, - then at the 11th shot from the previous change, the �lt becomes
-45 and
=_36, - the next shot is at the same �lt, but 36 ° apart, and will keep going so
9=45, - then at the 9th shot from the previous change, the �lt becomes 45 ,
and
10=90, - then at the 10th shot from the previous change, the �lt becomes
90 for zenith, and
=_90, - the next shot is at the same �lt, but 90 ° apart (the second zenith
shot)
=-90_0, - then at the next shot, the �lt becomes 90 for nadir, and
=_-90, - the next shot is at the same �lt, but 90 ° apart (the second nadir
shot)
= end.
To end in parked posi�on, as it started, in order to repeat it again and again:
S=90, 1=0_0, =_30, 11=-45, =_36, 9=45, 10=90,
=_90, =-90_0, =_-90, =90