Nodal Ninja Fanotec MECHA, User Manual, Page: 42 / 109

42
MECHA User’s Guide v.05.4
‒
Single Axis
© 2020 FANOTEC
Use Nodal Ninja IR Remote : check this checkbox if you use an NN IR remote
control, and connect the receiver to the AUX port.
Double press the Nodal Ninja IR Remote Power bu�on for power OFF : check
this checkbox to be able to power off MECHA pressing the power bu�on on
the remote control twice.
Use Aux Pulse, if exists : check this checkbox if you use MECHA in
applica�ons requiring the Aux Pulse file. Default is clear and can be ignored.
Custom Protocol on AUX Port : allows the use of the auxiliary port for
equipment that uses a specific protocol. With common remotes, a half-
press is detected as 1A, a full press is detected as 1A1S. These are the
possibili�es for a half-press:
• 045=1A executes a preset whose name starts with 045 + blank.
• -045=1A executes a preset whose name starts with 045 + blank, but in
the opposite sense of rota�on.
• HS=1A - Home Set. A Home Set can also be done by pressing the power
bu�on.
• The following uses the inverted rota�on for bu�ons, if it is set:
◦ 45.0=1A rotates MECHA 45.0° from Home posi�on, absolute.
◦ -45.0=1A rotates MECHA -45.0° from Home posi�on, absolute.
◦ ^45.0=1A rotates MECHA 45.0° from previous posi�on,
incremental.
◦ ^-45.0=1A rotates MECHA -45.0° from previous posi�on,
incremental.
• H=1A returns MECHA to Home posi�on set by HS or by the power
bu�on.