Nodal Ninja Fanotec MECHA, User Manual, Page: 13 / 109

In the case of using only one MECHA, a cylindrical panorama can be shoot
automa�cally, and if the �l�ng is done manually, even a spherical panorama
can be made using the code again for each row, a�er manual �l�ng.
When two MECHAs are used, if they are wireless connected in DAC, the
en�re spherical panorama can be done automa�cally, without the need for
manual �l�ng, using
1313> 1312> 1321> for CW, or 1313< 1312< 1321< for CCW.
These codes will shoot a mul�-row plus nadir and zenith panorama, the
difference being the start posi�on, the most used is
1313> .
These 4-digit codes must be entered on the horizontal MECHA, the lower
one, when it is idle, in MECHA DAC.
O�en, in this guide, we will use the term preset , which means a set of
instruc�ons and configura�ons, that can be saved and used when needed,
to perform specific opera�ons much faster. For example, some presets
contain all the informa�on that MECHA needs to execute a whole
panorama. You can create your own presets, or download presets from
server.
© 2020 FANOTEC
MECHA User’s Guide v.05.4
13