Nodal Ninja Fanotec MECHA, User Manual, Page: 23 / 109

Programming a preset using the UI
A custom number of shots around
• To execute a custom number of shots around, tap the Shots field, then
tap the Custom op�on, and enter the desired number of shots. In our
example, the number of shots is 7 .
• Tap the [LEFT] bu�on to execute the sequence to the le�, or [RIGHT]
bu�on to execute the sequence to the right.
Overwrite the preset Bu�on 1
If you want to save the above se�ngs and overwrite the preset Bu�on 1 ,
tap the [Save 1] bu�on. Note that all se�ngs displayed on the screen are
saved along with the 7 Shots se�ng, including the value of degrees of
rota�on which is 51.43 in our example.
If desired, similarly, overwrite the presets Bu�on 2:... and Bu�on 3:... using
[Save 2] and [Save 3] bu�ons.
23
MECHA User’s Guide v.05.4
‒
Single Axis
© 2020 FANOTEC