Nodal Ninja Fanotec MECHA, User Manual, Page: 15 / 109

Before first use
Before using MECHA, we recommend that you do specific checks and tests.
• First, if you have an R1, or an NN3, mount the R1 or the NN3 on MECHA
as shown in the images below:
Power up MECHA
• Power up MECHA pressing the power bu�on,
⏻
, for 3 to 5 seconds. It
may take about 40 seconds to start.
Check the ba�ery level
◦ If no LED lights up, or only a red LED lights
up, the ba�ery may be discharged, and it is
recommended to use a 5V-2A charger to
charge it. It may take 3 to 5 hours to charge
the ba�ery.
◦ Otherwise, a�er 30-40 seconds, you will
hear two beeps, and the LEDs below the
ba�ery symbol will turn off.
15
MECHA User’s Guide v.05.4
‒
Single Axis
© 2020 FANOTEC