Nodal Ninja Fanotec MECHA, User Manual, Page: 94 / 109

94
MECHA User’s Guide v.05.4
‒
Dual Axis
© 2020 FANOTEC
5. Set it in STA mode and enter the following values in STA Mode fields:
◦ Sta�c IP: 192.168.43.102
◦ Subnet: 255.255.255.0
◦ Gateway: 192.168.43.1
◦ DNS: 8.8.8.8
6. Tap on [ Apply] bu�on.
7. Tap on [Connect to Wi-Fi] at the bo�om of the page, then enter MECHA-
PHONE and the required password.
8. Switch to config of MECHA-H, tapping the bu�on [H MECHA / config] ,
which should be visible at the bo�om of the page.
9. Tap on [Connect to Wi-Fi] at the bo�om of the page, then enter MECHA-
PHONE and the required password.
10. Start MECHA-PHONE hot-spot.
MECHAs should connect to MECHA-PHONE a�er a li�le while.
As a result :
• We have the MECHAs connected to a SSID with Internet access,
provided 3g, 4g, so on, is available.
• This enables downloads of presets from server, updates, and the use of
your phone for Internet browsing as usual.
• MECHA-H-DAC will be accessible always at 192.168.43.101, and
• MECHA-V-DAC will be accessible always at 192.168.43.102
All you have to do is turn MECHA-PHONE hot-spot on when powering up
MECHAs, and to maintain it on while using MECHAs, for example disable
any automa�c turn-OFF of hot-spot on phone/device.
Now, your device is connected to the Internet and to MECHAs, and you can
download presets from server.