Nlynx OmniTerm WBT, User Manual

Page: 53 / 131

Terminal Properties
6.4 - Network Tab
Obtain an IP address from a DHCP server:
Click this option to enable DHCP addressing. The DHCP server will
automatically assign (lease) an IP address to your terminal plus other
parameters to configure the terminal. The
Release
and
Renew
buttons can
be used to Release this IP address and to Renew (acquire a new) the IP
address - use only when physically moving the OmniTerm to another subnet
or when the IP scheme for the current subnet has changed.
Specify an IP address:
Enter a static IP address in IP Address field. Enter the subnet mask and
gateway of the IP address in Subnet Mask and Gateway fields.
Terminal Name:
Name used by RDP connections and/or SNMP administration. Used by DHCP
(send Option 12) for Device (Client) identification. The name automatically
generated is 'T' plus the last 6 characters from the terminals MAC address;
e.g. For MAC=0050AC104712, Name=T104712.
Network Option:
Select an appropriate communication speed from Speed Multiplex scrolling
list. The default is Auto Sense, which automatically detects Network speed.
Other options include 10 MBps Half Duplex, 10 MBps Full Duplex, 100 MBps
Half Duplex and 100 MBps Full Duplex.
50