www.nitronic.ch
-
17 -
Nitronic AG
Mattenstrasse 11
CH – 2555 Bruegg
Tel.
+41 32 373 7070
Switzerland
Fax
+41 32 373 70
75
6. Step 3
Program Step
Selecting
and Entering
Choose the preset diameter
(
∅
∅
∅
∅
3.00
)
and enter the cable diameter e.g. 4.85 mm
Choose the preset stripping length (
9.0
) and
enter the stripping length e.g. 22.0mm.
3.00 –
4.65
– Enter
9.0 -
22
– Enter
To return to the table mode chosse Exit.
7. Calling up the Program
The entered processing cycle can now be activated as desired by selecting program 10.
8. Maintaining a List of Programs
To ensure the processing reproducibility, the stored parameters should be written down on paper
using the List of Programs (proposed layout is shown on page 18).
This list also provides info about the values stored in memory. In total are 999 storage locations
available for programs.
9. Optimizing the Quality
To optimize the stripping quality and processing time various auxiliary functions are available (refer
to Chapter „Auxiliary Functions“, page20).
List of Programs
Date : .....................
