Nilfisk-Advance SW900, Service Manual

Page: 53 / 137

Electrical and Control System 53 Service Manual – SW900
Fuse Check/Replacement/Reset (SW900 P)
1 Drive the machine on a level floor and ensure
that it cannot move
2 Turn the ignition key to “0”
Fuse check/reset
3 Check one of the following fuses for deactivation:
- (A): 5A fuse (FB), right side broom motor
- (B): 5A fuse (FC), left side broom motor
4 Reset any deactivated fuse, when the component
that caused deactivation has fully cooled down
Lamellar Fuse Check/Replacement
5 Remove the hopper by using its transport handle
and wheels
6 Disengage the front fastener and open the
engine compartment hood
7 On the right side of the engine (C), check/replace
the fuses:
- (D): 20A fuse (F0), main
- (E): 5A fuse (F1), electrical filter shaker
Reassembly
8 Close the engine compartment hood and engage
the front fastener
9 Install the hopper by using its transport handle
and wheels
P200279