Nilfisk-Advance SW900, Service Manual

Page: 115 / 137

Main Broom System 115 Service Manual – SW900
Left side skirt disassembly/assembly
1 Drive the machine on a level ground that is
suitable for checking the skirt height Make sure
that the machine cannot move independently
2 Turn the ignition key to “0”
3 Lift the tab (H) and turn the knob (I) counter-
clockwise until it is disengaged, then open the
left door (J)
4 Remove the screws (K) and the door (L)
5 Remove the screws (M) and remove the left side
skirt with bracket
6 Install the left side skirt by performing the steps
3 to 5 in the reverse order
7 Check the left side skirt height (see the
procedure in the relevant paragraph)
Right and Left Side Recovery Skirt Disassembly/
Assembly
1 Drive the machine on a level ground that is
suitable for checking the skirt height Make sure
that the machine cannot move independently
2 Turn the ignition key to “0”
3 Remove the hopper by using its transport handle
and wheels
4 Remove the screws (N) and remove the left or
right side recovery skirt (O)
5 Install the left side skirt by performing the steps
3 and 4 in the reverse order
6 Check the recovery skirt height (see the
procedure in the relevant paragraph)
P200341
Skirt Removal/Installation (Continues)