Nilfisk-Advance SW900, Service Manual

Page: 114 / 137

Main Broom System 114 Service Manual – SW900
Right side skirt disassembly/assembly
1 Drive the machine on a level ground that is
suitable for checking the skirt height Make sure
that the machine cannot move independently
2 Turn the ignition key to “0”
3 Remove the hopper by using its transport handle
and wheels
4 Unscrew the nuts (A) and remove the rear side
cover (B)
5 Remove the screws (C) and release the flange
(D)
6 Remove the nuts (E) and loosen the inner screw
(F)
7 Remove the right side skirt (G)
8 Install the right side skirt by performing the
steps 3 to 7 in the reverse order
9 Check the right side skirt height (see the
procedure in the relevant paragraph)
P200340
Skirt Removal/Installation