Niko 05-707, Quick Start Manual

Page: 12 / 16

nv
Niko
sa Industriepark West 40, BE-9100 Sint-Niklaas, Belgium — tel. +32 3 760 14 70 — fax +32 3 777 71 20 — e-mail: support@Niko.be — www.niko.be PM005-70700R07154
05-707
Step 1 (Setting the switch principle) Switch off power supply
➡
Only connect mains and load
(not the remote control)
➡
Switch to reverse phase control
➡
Switch on power supply
➡
➡ ➡ ➡ ➡
OK
➡ ➡ ➡
Resistive loads Overvoltage protection Overload or short-circuit Dimmer not connected to load
capacitive loads
➡ ➡ ➡
(electronic transformers) Switch off power Switch off power Switch off power supply
Mixed loads supply supply
➡
➡ ➡ ➡
Connect the load
Go to step 2 Switch to phase control Reduce load or
➡
restore short-circuit Switch on power supply
➡
➡
Switch power supply on
Switch on power supply
➡
➡ ➡
OK
➡
Inductive loads Overload
(ferromagnetic
➡
transformers) Switch off power
➡
supply
Go to step 2 Reduce load
➡
Switch on power supply
Step 2 (Choice of remote control)
Switch off power supply
➡
Connect the control signal
➡
Control choice
➡
➡ ➡
Push button control (see 4.3) Analog control (see 3.1)
➡ ➡
➡ ➡ ➡ ➡
Without memory (see 4.9) With memory (see 4.9) Automatic selection (see 4.5) Manual selection (see 4.6)
➡ ➡ ➡ ➡
Switch on power supply Switch on power supply Switch on power supply
➡ ➡
➡ ➡ ➡
0-10V analog 1-10V analog
Briefly press push button Briefly press push button Wait for 10s. (see 4.7) (see 4.8)
➡ ➡ ➡
Dim to max. light intensity Dim up to 20%
➡ ➡ ➡ ➡
Press briefly to switch off Press long to
⇑⇓
Switch on power Switch on power
➡ ➡
supply supply
OK OK
➡ ➡
Use electronic
➡
potentiometer
Operate control
➡
➡ ➡ ➡
Dimmer follows Dimmer does not follow Dimmer follows
➡ ➡ ➡
OK Switch off power OK
supply
➡
Change places of '+' and '-'
➡
Restart procedure
➡