Nidec Control Techniques HVAC Drive H300 HMI Bypass, Installation And Commissioning Manual

Page: 52 / 56

52 HMI Bypass Controller Installation and Commissioning Guide
VFD
Paremeter
Parameter
Description
HMI
Bypass Value
HVAC Drive
H300 Default
10.034 Number Of Auto-reset Attempts None 5
10.035 Auto-reset Delay 10.0 s 5.0 s
10.061 Braking Resistor Resistance 00.00
Ω
75.00
Ω
11.024 Serial Mode 7 1 NP 8 2 NP
11.044 User Security Status All Menus
12.010 Variable Selector 1 Mode Subtract Input 1
12.028 Variable Selector 2 Source 1 18.021 0.000
12.031 Variable Selector 2 Destination 1.053 0.000
14.003 PID1 Reference Source 18.017 0.000
14.004 PID1 Feedback Source 18.018 0.000
14.014 PID1 Output Lower Limit 0.01 % -100.00 %
18.013 Application Menu 1 Read-write Integer 13 2 0
18.017 Application Menu 1 Read-write Integer 17 750 0
18.019 Application Menu 1 Read-write Integer 19 1111 0
18.020 Application Menu 1 Read-write Integer 20 32727 0
18.021 Application Menu 1 Read-write Integer 21 24545 0
18.031 Application Menu 1 Read-write bit 31 On Off
20.001 Application Menu 3 Read-write Integer 1 20839 0
29.010 User Selectable Parameter 1 18.029 0.000
29.011 User Selectable Parameter 2 18.030 0.000
29.012 User Selectable Parameter 3 1.021 0.000
2.02.005 DHCP Enable Off On
2.02.006 IP Address 192.168.0.10 192.168.1.100
2.02.007 Subnet Mask 255.255.0.0 255.255.255.0
2.02.008 Default Gateway 0.0.0.0 192.168.1.254
3.01.011 T2 Digital I/O 1 Mode Digital Output Digital Input
3.01.015 T7 Digital Input 5, Analog Input 1 Mode Digital Input Volt In
3.01.016 T8 Digital Input 6, Analog Input 2 Mode Digital Input Volt In
3.01.017 T9 Digital Input 7, Analog Input 3 Mode Digital Input Volt In
3.01.019 Collective Digital I/O Mode CDIO Mappings CDIO Disabled
3.02.031 Collective Digital Input Destination 0.18.013 0.00.000
3.02.032 Collective Digital Output Source 0.18.022 0.00.000
The HMI IP address can be accessed through the HMI Settings icon and should
not be changed from the default IP address (192.168.0.2) or the HMI Bypass
will not function.