Sequence
Software
Corresponding Programming
Mode
1
LabVIEW 2018 or later
2
LabVIEW Real-Time Module 2018 or later
3
LabVIEW FPGA Module 2018 or later
1
LabVIEW FPGA Mode
4
NI CompactRIO Device Drivers 18.1 or
later
2
Real-Time Mode
Real-Time Scan (IO Variables)
Mode
Note
If you do not have the software media included with your hardware or do not
have a media drive, go to
to download the required software.
After installing the software, you must activate it using NI License Manager.
Software Compatibility Resources
For more information about installing the correct versions of software, visit
and
enter the Info Code
swsupport
.
For tips on resolving software compatibility issues with CompactRIO systems, visit
and enter the Info Code
swcompatibility
.
Note
If you try to install software that already exists on your host computer, the
installer will show nothing installed.
1
LabVIEW FPGA Module is not required when using Real-Time or Real-Time Scan (IO Variables)
program modes. To program the user-accessible FPGA on the cRIO-905
x
or deploy C Series
modules in the LabVIEW FPGA program mode, LabVIEW FPGA Module is required.
2
NI CompactRIO Device Drivers 18.1 and later include NI-DAQmx driver software. To deploy
C Series modules installed in the cRIO-905
x
in Real-Time (NI-DAQmx) mode, ensure that NI-
DAQmx is selected during installation. To deploy C Series modules installed in the cRIO-905
x
in
Real-Time Scan (IO Variables) mode, ensure that NI Scan Engine is selected during installation.
cRIO-905x Getting Started Guide
|
© National Instruments
|
3
