If the device driver software does not detect the cRIO-905
x
, verify that you installed the
appropriate NI software in the correct order on the host computer as described in
Installing Software on the Host Computer
Discovering the Controller in MAX
Complete the following steps to find the cRIO-905
x
controller in MAX.
1.
Launch MAX on the host computer.
2.
Expand
Remote Systems
in the configuration tree and locate your system.
3.
Select your target.
Tip
MAX lists the system under the model number followed by the serial
number, such as NI-cRIO-9057-01CEEDD8 by default.
cRIO-905x Getting Started Guide
|
© National Instruments
|
9
