NF FRA5022, Instruction Manual

Page: 83 / 145

5.3 Command List
FRA5022
5-5
Table 5-1 FRA5022 subsystem command list 2/3
Function Command
SENSe subsystem
Sweep measurement data
readout
:SENSe:DATA:SWEep[:DATA]?
Sweep measurement points
readout
:SENSe:DATA:SWEep:POINt?
Spot measurement data readout
:SENSe:DATA:SPOT[:DATA]?
Spot gain evaluation maximum
:SENSe:DATA:SPOT:LIMit:GAIN:MAXimum
Spot gain evaluation minimum
:SENSe:DATA:SPOT:LIMit:GAIN:MINimum
Spot phase evaluation
maximum
:SENSe:DATA:SPOT:LIMit:PHASe:MAXimum
Spot phase evaluation minimum
:SENSe:DATA:SPOT:LIMit:PHASe:MINimum
Spot evaluation results readout
:SENSe:DATA:SPOT:LIMit:REPort?
SOURce subsystem
Oscillator frequency
[:SOURce]:FREQuency[:IMMediate]
Measurement operation
[:SOURce]:SWEep:MEASure
Sweep operation mode
[:SOURce]:SWEep:MODE
Sweep frequency axis format
[:SOURce]:SWEep:SPACing[:TYPE]
Sweep frequency points
[:SOURce]:SWEep:SPACing:POINt
Sweep maximum frequency
[:SOURce]:SWEep[:LEVel]:MAXimum
Sweep minimum frequency
[:SOURce]:SWEep[:LEVel]:MINimum
Oscillator output SLOW status
[:SOURce]:VOLTage:SLOW:ENABle
Oscillator output variation
speed
[:SOURce]:VOLTage:SLOW[:STATe]
Oscillator output ON OFF
[:SOURce]:VOLTage:OUTPut[:STATe]
Oscillator DC bias
[:SOURce]:VOLTage:OFFSet[:IMMediate]
Oscillator AC amplitude
[:SOURce]:VOLTage[:LEVel][:IMMediate][:AMPLitude]
AC amplitude unit
[:SOURce]:VOLTage:UNIT