NF FRA5022, Instruction Manual

Page: 49 / 145

3.5 Basic Operations
FRA5022
3-19
■
Remote control interface selection INTERFACE connect
Value range: 0) GPIB 1) USB
Description: Sets to either GPIB or USB. It is not possible to use both at the same
time.
Initial values: 0) GPIB The initialization will not modify the setting, it will stay
as originally.
■
GPIB address INTERFACE address
Value range: 0 - 30
Description: Sets the
FRA5022
address for the GPIB system.
Set a value that differs from the values assigned to other devices
connected to the same bus.
Initial values: 2 The initialization will not modify the GPIB address, it will stay
as originally.
■
Serial Number Serial Number
Description:
Serial number for the FRA5022 model. This value cannot be modified.
The value is necessary to identify the device when a connection to
FRA5022
is made through USB.
■
Initialize all INITIALIZE all
Value range: 1) Execute
Description: By pressing the 1 key, all the settings related to measurement are
initialized.
Contents of data memory A and B are not erased.
Details …

“Table 3-1 Setting items and initial values”
The following setup item of the system menu screen is independent from the 10 setting
memories and kept by the backup battery even when the power is off it will not be erased.
・
Scan upper limit: SCAN limit
・
Automatic scan: SCAN man
/
auto
・
Oscillator output terminal change rate limit: OSC slow on/off
・
Remote control interface selection: INTERFACE connect
・
GPIB address: INTERFACE address