NF FRA5022, Instruction Manual

Page: 103 / 145

5.5 Command Explanation
FRA5022
5-25
:SENSe:DATA:SWEep[:DATA]?
Description: Outputs all the sweep measurement results according to the
graph axis (measured value display format).
The data is output as multiple groups as follows according to
data memory display settings.
A: All the data in data memory A
A/B: Data corresponding to A's measurement
frequency points within the range of
overlapping sweep frequencies between data
memory A and B
A&B: All of B data output after all of data A is output
B: All the data in data memory B
Parameters: None
Response: When displaying frequency, gain dB, phase:
format
<
NR3
>
,
<
NR2
>
,
<
NR2
>
When displaying frequency, gain (linear), phase:
format
<
NR3
>
,
<
NR3
>
,
<
NR2
>
When displaying frequency, a (real part), b (imaginary part):
format
<
NR3
>
,
<
NR3
>
,
<
NR3
>
Query example: SENS:DATA:SWE?
Response example: 12.345E+03,
-
118.62,45.54,
・・・
Outputs the data for all the measurement points delimited with
comma (,)
:SENSe:DATA:SWEep:POINt?
Description: Outputs measurement points for the sweep measurement
results of the displayed data memory.
A: Measurement points of data memory A
A/B: Measurement points of memory A with respect
to the frequency range common to data
momories A and B
A&B: Measurement points of data memory A followed
by those of data memory B
B: Measurement points of data memory B
Parameters: None
Response: When displaying A, A/B, B
<
NR1
>
When displaying A&B
<
NR1
>
,
<
NR1
>
For details of each value, refer to the description above.
Query example: SENS:DATA:SWE:POIN?
Response example: 1000 When displaying A, A/B, B
1000, 1000 When displaying A&B