NF FRA5022, Instruction Manual

Page: 109 / 145

5.5 Command Explanation
FRA5022
5-31
STATus:OPERation:NTRansition <transition_neg>
STATus:OPERation:NTRansition?
STATus:OPERation:PTRansition <transition_pos>
STATus:OPERation:PTRansition?
Description: Sets/queries the operation transition filter.
Depending on the filter settings, each bit will be set to OPER as
described below.
NTR PTR OPER
0 0 OPER is not set to 1 even if OPCR is modified
0 1 OPER is set to 1 if OPCR is modified from 0 to 1
1 0 OPER is set to 1 if OPCR is modified from 1 to 0
1 1 OPER is set to 1 if OPCR is modified
Parameters:
<
transition_neg
>
negative transition filter, format
<
NR1
>
,
range 0 to 65535
<
transition_pos
>
positive transition filter, format
<
NR1
>
,
range 0 to 65535
Details
・・・

“5.6.4 Operation Status”
Settings example: STAT:OPER:NTR 32767 Settings example: STAT:OPER:PTR 0
Response:
<
transition_neg
>
Response:
<
transition_pos
>
Query example: STAT:OPER:NTR? Query example: STAT:OPER:PTR?
Response example: 32767 Response example: 0
STATus:OVERload:ENABle <ovee>
STATus:OVERload:ENABle?
Description: Sets/queries the overload event enable register (OVEE).
Parameters:
<
ovee
>
register contents, format
<
NR1
>
, range 0 to 65535
Settings example: STAT:OVER:ENAB 0
Response:
<
ovee
>
Query example: STAT:OVER:ENAB?
Response example: 0
STATus:OVERload [:EVENt]?
Description: Queries the overload event register (OVER).
Parameters: None
Response: register contents, format
<
NR1
>
, range 0 to 32767
Details
・・・

“5.6.5 Overload Status”
Query example: STAT:OVER?
Response example: 0