NF FRA5022, Instruction Manual

Page: 53 / 145

3.5 Basic Operations
FRA5022
3-23
■
Frequency scale SWEEP freq. axis
Value range: 0) Log 1) Lin
Description: When in frequency sweep it selects either the geometrical interval
(Log) or the arithmetic interval (Lin). This will modify the frequency
axis display of the graph.
Initial values: 0) Log
■
Frequency max SWEEP freq. max
Value range: 0.11m - 100.00kHz
Description: Maximum frequency when in frequency sweep.
Initial values: 100kHz
■
Frequency min SWEEP freq. min
Value range: 0.10m - 99.999kHz
Description: Minimum frequency when in frequency sweep.
Initial values: 1Hz
■
Frequency point SWEEP points
Value range: 3 - 1000 points
Description: The number of frequency (measurement) points to be used when in
frequency sweep.
Measurement is performed between the maximum and minimum
frequencies at the specified number of frequency points spaced equally
apart on the linear axis (Lin) or logarithmic axis (Log).
The measurement data can be stored in the memory for up to 1000
frequency points. Pressing UP/DOWN keys many times during sweep
measurement may use up the measurement data memory space and
aborts the sweep measurement before it reaches the maximum or
minimum frequency.
Initial values: 100
■
Automatic sweep SWEEP man/auto
Value range: 0) Auto 1) Manual
Description: Auto: Measures at all the specified frequency points by changing the
frequency automatically.
Manual: Measures at one point with each press of one of the
DOWN/HOLD/UP keys.
Initial values: 0) Auto