5.1 Preparations Before Use
CA5350
5-3
5.1.2 Outline of USB
5.1.2.1 Preparation of Controller
Prepare a personal computer equipped with the USB interface when using the USB
interface.
Install the USB CDC driver in the computer that is used to control the product.
USB CDC: Universal Serial Bus Communication Device Class
It is possible to download the
CA5350
USB CDC driver install file from NF corporation
web site.
http://www.nfcorp.co.jp/
5.1.2.2 Preparation of CA5350
For the USB interface, no setting is required in
CA5350
. USB related parameters can be
found under the
UTILITIES
– USB and UTILITIES – IDENTIFICATION menus.
U T I L I T I E S
A
U S B
A
V : 0 D 4 A
A
P : 3 B
V : Vendor ID=0x0D4A (hexadecimal notation), 3402 (decimal notation): Which
indicates NF Corporation.
P : Product ID=0x3B (hexadecimal notation), 59 (decimal notation): Which
indicates product number of
CA5350
.
U T I L I T I E S
A
I D
A
9 0 8 3 2 5 1
ID : Which indicates 7-digit serial number uniquely assigned to each product.
Press the
EXIT
key to return to the previous menu.
Message terminator
There is no program message terminator for receiving messages. LF and CR will be
ignored.
Use
Y
Command to set the response message terminator.
5.1.2.3 USB Device Identification
Connect the
CA5350
to the USB connector of the computer using a generic USB cable.
Connection via USB hub may result in an operation failure.
CA5350
is automatically identified by connecting it with USB to the computer on which
USB CDC driver is installed.
The
CA5350
in the system is identified with the Vendor ID, Product ID, and Serial
Number displayed on the
UTILITIES
menu. Use these values when specifying the device
manually due to, for instance, automatic recognition error.
