8.1 Specifications
CA5350
8-5
8.1.6 General information
Display device
20 characters × 2 lines Black and white LCD
Backlight brightness can be set on 3 stages including
OFF
Memory for saving the setting 10 sets (including 1 set reserved for factory default
settings)
I/O grounding
Signal grounding of Input (
CURRENT
INPUT
), Output
(
INVERTING
OUTPUT
), and bias output (
INVERTING
BIAS
OUTPUT
) are insulated from the enclosure. Their
signal grounding is common.
Maximum withstanding voltage between signal
grounding and enclosure
is 42Vpk (DC+ACpeak).
Input over detection
Excessive signal is detected and displayed on LCD.
Over will detect the signal (input over) after
current-voltage conversion and signal (output over) of
output connector separately, and it will also display
them separately.
External control
GPIB
IEEE488.1
USB
USB1.1 full speed, device class CDC
Power supply
Voltage
AC100V / 120V / 220V / 240V ±10%
However, 250V or less
Frequency
50Hz/60Hz ±2Hz
Power consumption
40VA or less
Overvoltage category
II
Cooling of device
Forced cooling, rear panel discharge type
Setting posture
Horizontal (10° or less)
